ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!

Application areas:

• Epoxy resin 
• Chewing gum 
• Graffiti, also on porous surfaces 
• General adhesive residues and wallpaper including glue, exposure time up to 12 hours 
• Lacquer and varnish residues 
• Discolorations from felt-tipped pens, pencils, ink, tar 
• Do not use on asphalt, it will turn yellow!
• Also available in fluid form!

For all natural and artificial stones!

ATTENTION! Finalit No.7+ may have a caustic effect on polished soft stone (e.g. marble, limestone)!
You need to make your own tests.

• Use undiluted
• 1 kg is sufficient for 10 m² 
• Clean using Finalit No.1 Intensive Cleaner (only with graffiti and paints) 
• Exposure time is approx. 60 minutes 
• Then thoroughly rinse with water 
• Where possible, heat the surfaces to be treated 
• Apply a generous thick layer of Finalit No.7+ using a sponge, brush or scraper 
• Exposure time is approx. 5 – 60 minutes, then rub off or remove the coating using a sponge. Use a steam cleaner for porous material 
• Then thoroughly rinse with water 
• Clean surfaces as well as tools with Finalit No.1 Intensive Cleaner 
• In special cases, it may be necessary to allow for a longer exposure time or to clean a second time.
• You need to make your own tests!

• Epoxy resin (No. 7+ is 3 times as intensive when used together with No. 8, 30%, )
• Chewing gum (if possible heat with a flame, apply using a machine and quartz sand or silicone, silicone grinding brush and single-disc machine)
• Excellent cleaner for extremely soiled stone surfaces 
• Special chewing gum remover 
• Removes epoxy resin residues